Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Herriman
If you burn wood in a fireplace or stove on the southwest bench, you already know the draft gets fussy once the cold settles in. We handle chimney sweep work for Herriman homeowners who want the job explained, not sold. Our technicians have up to 14 years of experience, and we know this town’s housing well: newer tract homes, factory-built metal chimneys, inserts and freestanding stoves rather than old masonry stacks. Whether you’re up near the foothill lots or down in the valley-floor subdivisions, we’re set up for the kind of chimney work Herriman actually has. Call (855) 629-7505 to book a sweep.
Why Herriman Homeowners Call Blackwell Chimney Sweep for Chimney Sweep
Chimney work is all we do. We’re not a general handyman outfit that adds a brush to the van; sweep, inspect and repair all live under one roof here, so a cleaning that turns up a cracked cap or failing flashing gets addressed without you hunting for a second contractor. That single-trade focus is why Herriman homeowners call us back.
We work with the brands professionals specify. DuraFlex flexible liner systems, HeatShield ceramic resurfacing, and Gelco and Copperfield caps and components are the materials we know inside out, so when something needs replacing we can tell you what and why rather than improvising with whatever’s cheap. We’ll tell you what we found and what it means, with camera footage you can look at yourself.
Herriman sits high on the bench, and that shapes the work. Cold snaps and inversion alerts drive heavier burning, then burn-ban days idle the chimney for a stretch. Knowing that rhythm helps us time a sweep so the flue is clean before the wood season really gets going, and it’s part of why local know-how beats a call from someone who’s never seen the wind-driven debris these caps collect.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Maintenance in Herriman
Chimney Maintenance in Herriman mostly means keeping a factory-built metal flue and its insert clear, not servicing a legacy masonry stack. In these 1990s-to-2020s tract homes, the appliance is usually a wood insert or freestanding stove set into a metal chimney, and the maintenance that matters is pulling the insert, brushing the flue, clearing the cap, and checking the firebox and smoke chamber for cracks before they let moisture in. A typical annual maintenance visit in Herriman runs about $150 to $300, and a Level 2 inspection with camera runs roughly $200 to $400.
What an Annual Visit Covers
A yearly visit pulls the insert so the flue can be brushed top to bottom and the smoke chamber actually gets looked at, since a top-down brush alone can miss glazed creosote on an insert’s flue. We check the cap, the flashing, and the damper while we’re there, and clear the debris that bench-top wind and snow push against the cap.
Dryer Vents and Ambiance Fireplaces
Many Herriman homes have a gas or ambiance-only fireplace that sees little or no wood burning, and those get neglected because they “don’t need a sweep.” They still need the vent and cap checked. Dryer vents are the other quiet maintenance item in these subdivisions, and clearing one is a sensible add-on when a technician is already on site.
Chimney Sweep Services in Herriman
Chimney Sweep Services in Herriman start with a camera and end with a clean flue you can trust. When your fire smokes back, the draft weakens, or a damper won’t close after a stretch of heavier burning, that’s the signal to book. A standard sweep and cleaning in Herriman typically runs $130 to $280, and creosote removal on a heavily loaded flue runs about $200 to $450 depending on how much third-degree glazing is present. The written estimate sets the final price.
Pulling the Insert First
On a Herriman insert or freestanding stove, the technician pulls the unit before brushing so the flue and smoke chamber can be inspected directly rather than assumed clean from the top. That step is what separates a real sweep from a quick pass, and it’s how glazed creosote against the flue wall gets caught.

Camera Evidence Before Any Quote
Nothing gets recommended here without footage you can see. If a video inspection shows the liner is sound, we say so and stop. If it shows a genuine crack or deterioration, HeatShield or DuraFlex may be the right fix, and you’ll be looking at the same evidence we are before you decide anything.

Trusted Brands We Service in Herriman
The equipment on Herriman chimneys tends to come from a known set of makers, and we work with them directly. DuraFlex flexible liner systems are common on these factory-built metal flues, and we’re authorized to install and work with them. HeatShield is the industry’s resurfacing system we reach for when a flue shows cracks that sweeping won’t fix. Gelco and Copperfield caps and components turn up on homes across the bench, and sourcing through Olympia Chimney and Copperfield supply lines means we can match the right part instead of forcing a fit. We don’t claim a stocked warehouse, but we know these products and move quickly on turnaround.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Herriman Homes
- Wind-clogged and snow-packed caps. Sitting high on the southwest bench, these caps collect wind-blown debris and snow that choke draft. A clear cap often solves a “smoking fireplace” complaint before anything else is touched.
- Glazed creosote on insert flues. First- and second-degree creosote builds in a metal flue burned a few nights a season; third-degree glazing hides against the wall when a technician only brushes top-down and never pulls the insert.
- Upsell on sound metal flues. A factory-built metal flue that only needs brushing sometimes gets quoted a full reline. Without camera footage showing a real defect, that recommendation doesn’t hold up.
- Neglected gas and ambiance fireplaces. A gas or ambiance-only insert sees little wood, so it gets skipped, and the vent and cap check it still needs falls by the wayside.
Pricing for Chimney Sweep in Herriman, UT
Honest ranges, so you know what to expect before you call. A standard sweep and cleaning in Herriman typically runs $130 to $280. Creosote removal on a heavily loaded flue runs about $200 to $450. An annual maintenance visit lands around $150 to $300, and a Level 2 inspection with camera runs roughly $200 to $400. What moves the number is how much creosote is present, whether an insert has to be pulled, and whether the cap needs clearing or replacing. The estimate is free, and the written estimate sets the final price, so nothing is added after the fact. Nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Herriman
We work across the southwest valley, so if you’re just outside Herriman we can still help. That includes Bluffdale, Riverton, Draper, and West Valley City. If you’re in any of these, our chimney sweep team can book a visit and bring the same camera-first approach. We serve Herriman and the surrounding communities with the full sweep, inspect, repair scope.
Serving Herriman, UT – Our Local Coverage Area
We serve Herriman and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Herriman
Yes. Even light seasonal burning leaves creosote in a metal flue, and a factory-built insert flue benefits from an annual check because debris and snow also collect in the cap. A few nights a season is enough to warrant a look. Call (855) 629-7505 for an exact quote; estimates are free.
Ask to see the camera footage. A reline on a factory-built metal flue is only justified when video inspection shows a real crack, separation or deterioration, and a technician should be able to show you that footage before quoting. If you can’t see the defect, don’t approve the work. Call (855) 629-7505 to get a second look with camera evidence.
A Level 2 inspection is a camera-based look at the flue and accessible components, and it’s the level to ask for after a chimney fire, a change in appliance, or a property sale, and whenever a Level 1 turns up something that needs a closer look. For routine annual care, a Level 1 plus a camera check covers most Herriman homes. Call (855) 629-7505 to book one.
Because Herriman sits high on the southwest bench where winds and snow are pronounced, the cap takes a beating and collects wind-blown debris and packed snow that choke draft. Clearing the cap is often the fix for a smoking fireplace. Call (855) 629-7505 to have it cleared and checked.
Yes, though the work is different. A gas or ambiance-only insert sees little or no wood, so it doesn’t need creosote sweeping, but the vent and cap still need checking, and the same visit is a good time to clear a dryer vent. Call (855) 629-7505 to schedule the right maintenance for your setup.
Ready to book a sweep in Herriman? Sweep, inspect, repair, all in one visit, with camera evidence before anything is quoted. Call (855) 629-7505 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. And if you’re in Herriman, we know the bench-top chimneys here and what they actually need.
Written by the team at Blackwell Chimney Sweep.