Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Highland
If smoke is rolling into your living room on a cold canyon-wind night, you need someone who understands why, not just someone with a brush. We handle chimney repair in Highland for the larger foothill homes that define this town: tall masonry stacks, multiple flues, wood inserts, and gas-converted fireboxes that all need to breathe correctly against American Fork Canyon’s downdrafts. Our technicians have up to 14 years of experience, and we sweep, inspect, and repair so you’re not juggling three contractors. Call (855) 629-7505 for a free estimate.
Why Highland Homeowners Call Blackwell Chimney Sweep for Chimney Repair
Highland is a town of custom and semi-custom homes on generous bench lots, and the chimney work here matches that housing: long runs, architectural masonry, and fireplaces that were often added or converted after the house was built. We know that when a Highland homeowner calls about smoke, the answer is frequently a stack-height or cap-style problem rather than creosote alone, and we approach repairs from that diagnostic starting point.
Our reputation in Highland comes from telling people plainly what we found and what it means. We use HeatShield ceramic resurfacing for deteriorated liners, work with DuraFlex flexible liner systems where a relining makes sense, and fit Gelco caps when the existing cap is letting canyon wind overload the flue. Chimney work is all we do, so there’s no generalist learning on your job. And because we handle sweeping, inspection, and repair together, an issue spotted during a cleaning can usually be addressed in the same visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Highland
Chimney Flashing Repair in Highland often starts with a question most homeowners don’t think to ask: is that water stain on the ceiling coming from the roof, or from where the chimney meets it? Flashing is the metal that seals that junction, and when it pulls loose or corrodes, meltwater from snow sitting against the stack works its way down into the smoke chamber and firebox. We reseal and rebuild flashing where the seal has failed, matching the metal to the roof and the chimney’s material.
On Highland’s older custom masonry chimneys, flashing failures are common after a run of freeze-thaw winters. A typical flashing repair here runs $250 – $650 depending on roof pitch, access, and how much of the existing flashing can be saved. The written estimate sets the final price.
Loose and Corroded Flashing
When the step flashing has lifted or the counter-flashing has rusted through, water finds the gap fast. We reset or replace the metal and seal the joints so meltwater sheds away from the stack instead of into it.
Roof-to-Chimney Seal Failures
A failed seal often shows up as a damp firebox or a smell after rain. We trace the leak to its source before recommending work, so you’re not paying for a flashing repair when the real culprit is the crown.
Chimney Crown Repair in Highland
Chimney Crown Repair in Highland protects the one part of the chimney most exposed to the weather: the concrete cap at the top. The crown sheds water away from the flue, and when it cracks or spalls, meltwater gets in, freezes, and widens the damage a little more each winter. We repair crowns with proper slope and a sealed bond to the flue, so the top of the chimney handles snow load and freeze-thaw the way it’s supposed to.
On the tall two-story stacks common on Highland bench lots, a cracked crown is also a draft problem, because a broken top edge lets wind shear across the flue opening. A typical crown repair here runs $350 – $800, and a full crown rebuild on a larger masonry stack runs $800 – $1,600. Final cost is set by the written estimate.
Cracked and Spalling Crowns
Hairline cracks widen every freeze cycle, and spalling concrete means the crown has already absorbed water. We remove the failed material and rebuild the crown with a proper overhang so runoff clears the masonry below.
Crown Rebuilds on Tall Stacks
Oversize masonry chimneys sometimes need the whole crown recast rather than patched. That work also gives us the chance to check flue tile tops and the cap while we’re up there.
Trusted Brands We Service in Highland
We work with a deliberate roster of professional-grade products because they’re what the trade specifies, not what’s cheapest on a shelf. HeatShield handles liner cracks that sweeping alone won’t solve. DuraFlex flexible liner systems cover relining where the existing flue has failed. Gelco and Copperfield caps and ventilation components hold up against canyon wind and heavy snow. Sourcing through Olympia Chimney and Copperfield supply lines means we can get the right part for your chimney rather than improvising a fit. When you need a repair in Highland, you get the material specified for the job, and we’ll tell you which one and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Highland Homes
- Canyon downdrafts on tall bench-lot stacks. Under-height or wrong-style caps let American Fork Canyon wind push smoke back down the flue on cold evenings. The fix is usually stack height or cap style, not more sweeping.
- Third-degree creosote glazing. Heavy wood burning from November through March, slowed by inversion weather, builds creosote that glazes hard inside the liner. A standard brush won’t cut it, so the liner often needs resurfacing or relining.
- Spalling crowns and failed flashing. Snow and freeze-thaw winters crack crowns and pull flashing loose on older custom masonry. Once meltwater reaches the smoke chamber, the damage spreads.
- Appliance changes on original masonry. Gas conversions and inserts added to older fireplaces often leave a warped damper or a smoke chamber that no longer seals. Repair plans have to account for the appliance, not just the original brick.
Pricing for Chimney Repair in Highland, UT
Repair prices in Highland reflect the housing stock: tall stacks, multiple flues, and more masonry than you’ll find in newer flat-valley subdivisions. A typical mortar repointing job here runs $400 – $1,200 depending on how much joint work is needed. Spalling brick repair runs $300 – $900. Chimney waterproofing runs $250 – $600, and a partial rebuild on a damaged upper stack starts around $1,500 and goes up with size and access. What moves the number is stack height, roof pitch, how many flues are involved, and whether the work is a patch or a rebuild. The estimate is free, and the written estimate sets the final price. Call (855) 629-7505.
We Also Serve Cities Near Highland
We take care of chimney repair for homeowners in American Fork, Cedar Hills, Lehi, and Alpine as well. Each town has its own weather pattern and housing style, which changes the diagnosis. If you’re in Highland or a neighboring community and want a straight answer on what your chimney needs, get in touch.
Serving Highland, UT – Our Local Coverage Area
We serve Highland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Highland
Because it’s almost always a draft problem, not a cleaning problem. On cold nights with canyon downslope wind off American Fork Canyon, the air pressure at the top of a tall bench-lot stack can overcome the flue and push smoke down into the living room. An under-height or wrong-style cap makes it worse. A technician checks stack height, cap style, and pressure balance before assuming creosote is the cause. Call (855) 629-7505 for a free estimate.
Once a year for each appliance in regular use, and that matters more in a multi-flue Highland home. A house with two fireplaces, a wood insert, and a gas-converted firebox has several separate flues, and each needs its own look. A single-visit inspection covers them together. Call (855) 629-7505 to book an inspection.
Often the liner needs resurfacing or replacing, because glazed third-degree creosote bonds to the flue and a brush won’t remove it. HeatShield ceramic resurfacing handles many cracked and deteriorated liners; a full reline with a DuraFlex system covers flues that have failed structurally. We’ll tell you which applies after we see the flue. Call (855) 629-7505 for a free estimate.
Yes, and often more than expected. When an insert is added to an original masonry fireplace, the damper may be warped, the smoke chamber may no longer seal, and the flue sizing may not match the new appliance. Those are repair items, not cosmetic ones. A proper inspection catches them. Call (855) 629-7505 to schedule one.
It means rebuilding the crown so it slopes and sheds water, and resealing or replacing the flashing where the chimney meets the roof. On tall stacks, that also means checking the flue tile tops and cap while we’re at height. A typical crown and flashing repair in Highland runs $500 – $1,400 combined, set by the written estimate. Call (855) 629-7505 for a free estimate.
If your Highland chimney needs a real diagnosis, we’ll tell you what we found and what it means, then give you a written estimate before any work starts. Call Blackwell Chimney Sweep at (855) 629-7505 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Blackwell Chimney Sweep.