Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for West Valley City Homeowners
Wood smoke, canyon wind, and the freeze-thaw swings along the Oquirrh foothills all work on a chimney in ways you can’t see from the living room. A cracked flue tile or a nest packed into the smoke chamber doesn’t announce itself until the first cold snap, when the fireplace won’t draw or smoke rolls back into the house. That’s why we inspect before you burn, not after something goes wrong. Our technicians have up to 14 years of experience, and we bring a camera and a written report to every West Valley City inspection so you see exactly what we see. We can often schedule a chimney inspection in West Valley City the same day. Call (855) 629-7505. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Fireplace Inspection
Fireplace Inspection is the focused check of the firebox, damper, smoke shelf, and the first few feet of flue above the fire – the parts that take the most heat and the most abuse. You need one when you’ve just moved in, when the fireplace has sat unused for a season or more, or when you’re noticing smoke, odor, or a damper that won’t seat. We open the firebox, examine the brick and mortar joints, test the damper, and look for gaps that let heat reach framing. We then tell you plainly what we found and what it means. Most fireplace inspections in West Valley City run $75-$200 depending on whether camera work is included and how much creosote is present; the written estimate sets the final price. If a Fireplace Inspection turns up a problem, our Blackwell Chimney Sweep team can handle the repair on the same visit in many cases.
What We Check Inside the Firebox
We look at the brick face, the mortar joints, the fireback, and the grate area for spalling, cracks, and gaps where heat can escape. Even a hairline crack in the firebox lets hot gas reach masonry that wasn’t meant for it. We note what’s cosmetic and what needs attention now.
Damper and Smoke Shelf Test
A damper that doesn’t close fully wastes heat up the flue all winter; one that won’t open makes the fireplace useless. We operate it by hand, check the frame and pivot, and inspect the smoke shelf above for soot buildup that causes backdrafts. If the damper needs replacement, we can quote it on the spot.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole chimney system, not just the firebox – crown, cap, flashing, exterior masonry, flue, and the connections where each meets the other. You need a full inspection when you’re buying a home, after a chimney fire or a strong wind event, or on a regular schedule if you burn wood through the winter. We walk the roof line, check the crown for cracks, look at the flashing where the chimney meets the shingles, and run a camera down the flue. Then we hand you a written report with photos. Chimney Inspection Services in West Valley City typically run $125-$350 depending on the level of inspection and whether repairs are needed. If the report shows work, we quote it in writing from the same visit – no second contractor to chase down.
Roof Line and Flashing Checks
West Valley City’s spring melt and wind-driven rain find every gap at the chimney base. We look at the crown, the cap, and the step flashing for cracks and lifted edges that let water in. Leaks that look like roof problems often start at the chimney.
Interior and Exterior in One Visit
We inspect from the firebox up and from the roof down so nothing is missed between the two. That means looking at attic penetrations and ceiling staining as well as the masonry above. It’s one appointment instead of two.
Chimney Flue Inspection
Chimney Flue Inspection is the close look inside the flue itself – the tiles, the liner, the joints, and the clearance to combustibles – and it’s the part of an inspection most homeowners never get to see. You need it when the flue hasn’t been checked in a few seasons, when you’ve changed what you burn (wood to gas, or a new insert), or when you’ve had a chimney fire. We run a video camera the length of the flue and check tile alignment, gaps, and liner condition on the monitor as we go. Flue inspections in West Valley City fall into the same $125-$350 range as a full inspection, with a camera report included. Where we find deterioration, we use chimney repair methods like HeatShield ceramic resurfacing rather than tearing out and rebuilding.
Video View of Every Tile Joint
Tile joints are where flues fail first, and your eyes can’t reach them from the top or the bottom. The camera shows misaligned tiles, gaps, and missing mortar in real time. You watch the screen with us, so the findings aren’t a mystery.
Clearance to Combustibles
Wood framing near the chimney needs proper clearance from the flue, and a flue running too close to framing is a fire waiting to happen. We check attic and wall penetrations where they’re accessible. When something is off, we tell you before you light the next fire.
Chimney Fire
Chimney Fire damage is what we inspect for when a homeowner reports a roaring sound, a shower of sparks, or a strong burning smell that didn’t come from the firebox – even if the fire seemed to burn itself out. You need an inspection after any suspected chimney fire, and honestly after any season of heavy burning where creosote has built up. Creosote ignites at high temperature and can crack tiles or warp a liner without breaking through the roof. We inspect the full flue with a camera, check for cracked or spalled tiles, and look at the crown and cap for heat damage. Post-fire inspections in West Valley City typically run $150-$350; if a liner is compromised, replacement with a DuraFlex flexible liner is quoted in writing after you’ve seen the video. Don’t relight until it’s been checked. Call (855) 629-7505.
What to Do After a Suspected Fire
Close the damper, keep everyone out of the room, and call for an inspection before you burn again. Don’t try to look down the flue yourself – heat-damaged masonry can fail without warning. We’ll tell you on the phone what to do while you wait.
Signs the Flue Was Damaged
Puffy, honeycombed creosote, cracked tiles, a warped damper, or discolored exterior masonry all point to heat damage. Any one of them means the chimney needs a camera inspection before it’s used. We document each finding in the report.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the standard inspection for a real estate transaction, a change in fuel or appliance, or after an event like a chimney fire or an earthquake – it covers everything a basic check does plus the accessible portions of the attic, crawlspace, and all flue connections. It’s the level most home sales in Utah require, and it’s the one we recommend when you don’t know the chimney’s history. We use a video camera through the flue, check the attic and crawlspace for clearance and staining, and inspect all accessible connections and the exterior. Level 2 inspections in West Valley City generally run $200-$400 depending on chimney height, roof pitch, and how many flues are present. You get a written report with photos that you can hand to a buyer, seller, or insurer. It’s the most complete picture of a chimney you can get without opening walls.
When a Level 2 Is Required
Home purchases, adding or replacing an appliance, and any event that may have damaged the chimney call for Level 2. It’s also the right call if you’ve never had the chimney inspected and don’t know what’s inside. We explain the difference between levels on the phone so you book the right one.
The Written Report You Get
Photos, findings, and clear recommendations – not a checklist with vague boxes. We tell you what’s safe to use as-is, what should be repaired, and what can wait. The estimate for any repair is written and given to you before we leave.
Chimney Leak
Chimney Leak damage usually shows up as a ceiling stain, a damp patch on the chimney breast, or rust on the damper – and it’s almost never where the water actually enters. You need a leak inspection when you see staining after rain, when the firebox smells musty in spring, or when masonry on the exterior is crumbling. Water gets in at the crown, the flashing, the cap, or the mortar joints, and freeze-thaw in West Valley City widens every crack it finds. We inspect the crown, cap, flashing, and masonry from the roof, and check the interior at the same time to match the symptom to the source. Leak inspections run $125-$300; repairs are quoted separately in writing. We install Gelco and Famco caps and use proper crown repair rather than a smear of caulk. Stopping the water now protects the flue and framing.
Where Water Actually Gets In
The crown is the most common entry point, followed by the flashing at the roof line and a missing or loose cap. Brick and mortar joints soak up water and pass it inward. We identify the actual source before quoting anything.
Caps That Keep the Weather Out
A proper cap keeps rain, snow, and animals out while letting smoke escape. We install Gelco and Famco caps sized to your flue. It’s a small job that prevents a large one.

Chimney Camera Inspection
Chimney Camera Inspection is the video look inside the flue that turns a guess into evidence – we run a camera the full length, record the run, and review the footage with you on site. You need one any time a problem is suspected but not visible from the top or bottom: after a chimney fire, when a level 2 is required, or when a previous sweep said you need a liner but you couldn’t see why. The camera shows tile joints, cracks, offsets, and creosote condition in real time. Camera inspections in West Valley City typically run $125-$300 and include the recorded footage and a written summary. Nothing is recommended without camera evidence you can see for yourself – and if the flue is sound, we’ll say so. That’s the whole point of a camera. Call (855) 629-7505. We answer 24/7.
What the Camera Finds
Misaligned tiles, missing mortar, cracks, and heavy creosote glazing are the common findings. The camera also shows bird nests and debris that reduce draft. Each finding gets a photo in the report.
When We Recommend a Liner
Only when the camera shows damage that sweeping won’t fix – cracked or missing tiles, gaps at joints, or a flue that’s too large for the appliance. We use HeatShield resurfacing or a DuraFlex liner depending on what the footage shows.
Brands We Service
We work with DuraFlex flexible liner systems because it’s what professionals specify when a flue has to be relined, and we’re authorized to install their systems. We know where those liners wear and how connections should be seated. We also use HeatShield ceramic resurfacing for flues that are cracked but still structurally sound, a repair method most general sweep companies don’t offer.
On the hardware side we stock and install Gelco and Famco caps and ventilation components, and we source through Olympia Chimney and Copperfield supply lines because those channels carry professional-grade parts rather than big-box substitutes. Whether you have a DuraFlex liner, a HeatShield-resurfaced flue, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that used to draw and now doesn’t usually points to a blocked flue, a failed damper, or a pressure problem in the house. None of those fix themselves, and burning anyway puts smoke and carbon monoxide into the room.
- A strong burning or creosote smell that lingers. Creosote buildup glazed onto the flue gives off an acrid smell, especially on warm days. Heavy glazed creosote is the fuel for a chimney fire, so it’s worth checking before the next burn.
- Water stains or a damp patch on the chimney breast. Staining after rain means water is getting in somewhere up top. Left alone, it rots framing and breaks down mortar through freeze-thaw.
- Visible cracks in the exterior masonry or crown. Cracks that run through the crown or brick face let water in and can signal movement in the chimney structure. They widen with every freeze.
- You just bought the house and don’t know the history. A chimney with no inspection record is an unknown. A level 2 inspection tells you what you actually bought before the first fire.
Our Process, Step by Step
- 1
We talk first. On the phone we ask what you burn, how often, and what you’ve noticed. That narrows the inspection so we bring the right tools and book the right level.
- 2
We protect the room. Drop cloths go down before anything else. Chimney work is dusty, and your floors and furniture shouldn’t pay for it.
- 3
We inspect from the bottom up and the top down. Firebox, damper, smoke chamber, flue, crown, cap, and flashing all get checked. We run a video camera the length of the flue and record it.
- 4
We show you what we found. You watch the footage on the monitor and see the same cracks and joints we do. No jargon needed – we explain what each finding means for how you use the fireplace.
- 5
We put it in writing. You get a report with photos and a written estimate for any repair. Nothing is recommended without camera evidence, and we tell you plainly when work can safely wait.
How Much Does Chimney Inspection Cost in West Valley City?
Most chimney inspections in West Valley City run $75-$400 depending on the level and the chimney. A basic fireplace inspection with a look at the firebox and damper typically lands at $75-$200. A full chimney inspection with camera work runs $125-$350. A Level 2 inspection for a home sale or after a fire generally runs $200-$400. A leak inspection is usually $125-$300. These are typical estimates, not exact quotes; the written estimate sets the final price.
What moves the price: the level of inspection, how tall the chimney is, how steep the roof is, whether there are multiple flues, and how accessible the attic and crawlspace are. A single-flue ranch with a walkable roof costs less to inspect than a two-story with three flues and a steep pitch. Repairs are always quoted separately, and only after you’ve seen the camera footage.
How to avoid overpaying: ask up front which level of inspection you’re getting and what the report includes. Insist on camera evidence before anyone recommends a liner or a rebuild – a sweep who can’t show you the problem on screen is asking you to take it on faith. Get the estimate in writing before work starts.
What’s included in our free estimate: the on-site look, the written findings, and a written price for any recommended repair. There’s no charge for the estimate itself, and no obligation. Call (855) 629-7505 for an exact quote.
Our Service Area Near West Valley City
We inspect chimneys throughout West Valley City and the surrounding valley – West Valley City neighborhoods near the Oquirrh foothills, plus Riverton, Herriman, Bluffdale, Draper, and out toward Tooele, Erda, and Stansbury Park. We also cover Alpine, Lehi, Highland, and Summit Park. Scheduling is booked by area, and we’ll give you a realistic window when you call. Same-day appointments are often available when you book early. (855) 629-7505.
Serving West Valley City, UT – Our Local Coverage Area
We serve West Valley City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in West Valley City
A chimney inspection is a professional check of the firebox, damper, smoke chamber, flue, crown, cap, and flashing to confirm the chimney is safe to use. It includes visual checks and, at most levels, a video camera run through the flue. You get a written report with photos. Call (855) 629-7505 to book yours.
A basic fireplace inspection usually takes 30-45 minutes. A full inspection with camera work or a Level 2 typically takes 60-90 minutes, depending on roof access and how many flues there are. We’ll tell you what to expect when you book. Estimates are free.
Most chimney inspections in West Valley City run $75-$400 depending on the level and the chimney. A basic fireplace inspection is typically $75-$200, a full inspection $125-$350, and a Level 2 $200-$400. The written estimate sets the final price. Call (855) 629-7505 for an exact quote – estimates are free.
Yes. We’re authorized to install and work with DuraFlex flexible liner systems, and we use HeatShield ceramic resurfacing for flues that are cracked but structurally sound. If your chimney has a different liner, we can inspect and service it too. We’ll tell you what we find and what it means.
Same-day chimney inspection is often available when you call early. Fast dispatch runs 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 629-7505. We answer 24/7.
We stand behind the repair work we do, and we’ll explain the specific coverage for your job in the written estimate before we start. Material warranties come from the manufacturer – for example, DuraFlex liners carry their own manufacturer terms. Ask us and we’ll walk you through it.
Clear the area in front of the fireplace, move anything breakable off the hearth, and don’t light a fire for at least 24 hours before we arrive. Have the damper accessible and tell us anything you’ve noticed about drafts, smoke, or odors. If the roof needs access, tell us about pets or locked gates.
Schedule Your Chimney Inspection Service in West Valley City Today
One inspection now beats an emergency call before the first cold snap. We’ll check the full chimney, run the camera, and put the findings in writing – including when work can safely wait. Our technicians have up to 14 years of experience. Call (855) 629-7505 for a no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Blackwell Chimney Sweep.