Chimney Repair in Herriman, UT | Blackwell Chimney Sweep

Chimney Repair in Herriman - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Herriman

If your fireplace is smoking back into the room, your ceiling is stained above the firebox, or a wind storm has packed your chase top with debris, we can help. Herriman sits high on the southwest bench, and the wind and snow up here treat chimney caps and flashing harder than most of the valley does. We work on the housing stock that dominates this town: 1990s to 2020s tract homes with factory-built metal chimneys, wood inserts, and gas fireplaces. Our technicians have up to 14 years of experience, and we cover repair, sweeping, and inspection under one roof. Call (855) 629-7505. We answer 24/7. Fast dispatch, 7am-7pm.

Call (855) 629-7505

Why Herriman Homeowners Call Blackwell Chimney Sweep for Chimney Repair

We’re a single-trade chimney company, not a handyman service squeezing chimneys in between other jobs. That focus shows up in the materials we work with. We’re authorized to install and work with DuraFlex flexible liner systems, we use HeatShield ceramic resurfacing for deteriorated flues, and we fit Gelco caps and ventilation components. Those are the products professionals specify, and they’re what we bring to a Herriman job.

We also don’t guess. Every repair starts with a camera inspection, and you see the footage before we quote anything. If the camera shows a rusted chase-top flashing and nothing else, that’s what we’ll quote. If it shows a firebox panel that’s cracked behind an insert, you’ll see that too, and we’ll explain why it matters and what a proper fix involves.

Herriman homeowners tend to be skeptical of cheap quotes, and for good reason. The worst upselling in this trade happens on flues and liners, where a homeowner can’t see the problem and has to take someone’s word for it. We take that seriously. If a repair can safely wait until spring, we’ll tell you. If it can’t, we’ll show you why. Call (855) 629-7505 and we’ll get you booked.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Liner Installation in Herriman

Chimney Liner Installation in Herriman usually comes up when an insert or freestanding stove is venting into a flue that was never sized or listed for it, and a stainless liner with the correct vent connector is the fix. In a typical Herriman two-story with a wood insert set into a factory-built fireplace, the failure shows up as a smoky draft or a choking burn. A qualified pro pulls the insert on its rails, brushes the metal flue, camera-inspects the smoke chamber and vent connector, and fits a listed stainless liner sized to the appliance. Factory-built metal chimneys are the norm in Herriman, so liner work here means matching the liner system to the appliance and the existing chase, not rebuilding a masonry stack. Nothing gets quoted until you’ve seen the camera footage.

Sizing the liner to the appliance

An insert running into an undersized flue builds creosote faster and drafts poorly. We check the appliance’s rating and match the liner to it, using DuraFlex systems where flexible relining fits the chase.

Vent connectors and adapters

The connection between the insert and the flue is where a lot of Herriman draft problems start. We inspect the connector, replace what’s failing, and seal the joints so the appliance draws properly.

Chimney Flashing Repair in Herriman

Chimney Flashing Repair in Herriman is mostly chase-top work on newer tract homes, where the sealant and flashing at the top of the chimney chase dry out and let snowmelt in. The sign is usually a water stain on the ceiling near the firebox, and it shows up weeks after the storm that caused it. We get up on the chase, look at the flashing and sealant with a camera, and repair what’s actually failing rather than resealing everything as a matter of course. Typical flashing repair in Herriman runs $300 to $800, and a full chase-top rebuild with new flashing and cap runs $900 to $2,000. The written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 629-7505

How snowmelt finds its way in

On the exposed southwest bench, snow sits on the chase top and melts slowly, and any gap in the sealant gets tested for days. That’s why leaks here often appear in late winter rather than during the storm itself.

Flashing versus roofing

The flashing at the chimney chase is part of the chimney system, not the roof shingles. A roofer handles the shingles around it; the chase-top flashing and cap belong with the chimney repair.

Trusted Brands We Service in Herriman

We work with an intentional roster of professional-grade brands because they’re what holds up. DuraFlex for flexible liner systems, HeatShield for ceramic resurfacing of deteriorated flues, Gelco and Famco for caps and ventilation components, and Olympia Chimney and Copperfield supply lines for the parts a repair actually needs. When a Herriman chimney needs a cap, a liner, or a new vent connector, we’re not improvising with big-box substitutes. We source through established professional channels and fit the right component for the job. That keeps turnaround quick and means the repair is done with the material the trade specifies. Sweep, inspect, repair, all in one visit where the work allows.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 629-7505

Common Chimney Repair Problems We See in Herriman Homes

  • Debris and snow packed into the factory-built cap. The wind up on the southwest bench drives debris into caps and snow packs on top, and draft dies. Smoke comes back into the room on the next burn.
  • Dried-out chase-top flashing and sealant. Herriman’s newer chases seal with caulk and flashing that harden with sun and cold. When they fail, snowmelt works in and stains the ceiling above the firebox.
  • Inserts vented into flues not built for them. Many Herriman homes have an insert or freestanding stove dropped into a flue that’s undersized or unlined. Creosote builds fast and draft suffers.
  • Cracked firebox panels behind an insert. A cracked panel the insert was never rated for is a safety issue, and it only shows up on camera once the insert is pulled. We check before recommending anything.

Pricing for Chimney Repair in Herriman, UT

We quote repairs per job, and the written estimate sets the final price. To give you a real sense of the Herriman market: chase-top flashing repair typically runs $300 to $800, a cap replacement with new Gelco or Famco hardware runs $250 to $600, a stainless liner installation runs $1,800 to $4,500 depending on flue length and appliance, and masonry repointing or spalling brick repair runs $600 to $2,500. A full masonry rebuild, which is rare in Herriman’s newer stock, starts around $4,000. What moves the number is the access, the length of the flue, whether an insert has to be pulled, and the material specified. Estimates are free, and nothing is recommended without camera evidence you can see for yourself. Call (855) 629-7505 for an exact quote.

We Also Serve Cities Near Herriman

Herriman is one of the communities we cover in the southwest valley, and we also work in Bluffdale, Riverton, Draper, and West Valley City. If you’re just over the line in one of those towns, the work is the same: camera inspection first, repair quoted from what the footage shows. You can read more about our chimney repair work or check our Herriman page for local details.

Serving Herriman, UT – Our Local Coverage Area

We serve Herriman and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Herriman

Why Herriman Chooses Blackwell Chimney Sweep

We set the standard for chimney repair in Herriman.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Herriman

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Herriman Customers Say

Trusted by homeowners across Herriman and surrounding areas.

★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Lisa Vaughn
★★★★★

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

Angela Kim
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Paige Doyle

Ready for Chimney Repair in Herriman?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Herriman.

(855) 629-7505

Request a Free Estimate in Herriman

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7