HeatShield Chimney Cleaning in Highland, UT

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

HeatShield Chimney Cleaning in Highland, UT

We provide independent HeatShield service across Highland: evaluating, cleaning around, and repairing cast-in-place refractory liners in the tall masonry and prefab fireplaces that fill the bench and foothill lots here. The one thing that makes our HeatShield work in Highland different is draft. Because so many homes sit close to the mouth of American Fork Canyon, a liner can be perfectly intact and still smoke into the room when downslope winds hit the stack. We diagnose that alongside the creosote. Call (855) 629-7505 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (855) 629-7505

Why Highland Residents Choose Us for HeatShield Service

HeatShield is a cast-in-place refractory liner system, a specialist-tier repair that general sweep companies rarely offer. We work with HeatShield because it’s what professionals specify when a masonry flue is cracked, spalled, or simply not safe to burn against any longer. Sweep. Inspect. Repair. All in one visit.

That matters in Highland, where a single home can have two or three flues on a tall stack, and where an insert has often been added to a fireplace that was never sized for it. We bring that history into the diagnostic instead of just running a brush down the flue and handing you a bill.

We’re an independent provider. We’re not affiliated with or authorized by HeatShield, and no manufacturer warranty is implied by our work. What we offer instead is straightforward judgment: we’ll tell you what we found and what it means, and whether a reline is actually the right fix or whether cap and stack correction will solve the smoke problem for a fraction of the cost. Chimney work is all we do, and our technicians have up to 14 years of experience.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common HeatShield Chimney Cleaning Problems We Solve in Highland

  • Liner delamination and spalling at the flue collar. On the tall two-story stacks common to Highland’s bench homes, the top of the liner takes the hardest temperature swings. Canyon downdrafts push cold air down a hot flue and the liner face flakes and separates at the collar. We inspect that joint closely because it’s the first place failure shows.
  • Cracks and joint separation after heavy burn seasons. Highland fireplaces run hard from November through March, and creosote-fueled chimney fires crack poured refractory liners over time. A hairline crack that looks minor from the firebox can open up under repeated heat cycling, and that’s exactly where hot gases reach framing.
  • Oversize flues with an undersized HeatShield liner. A liner that wasn’t correctly sized to the firebox produces weak draft and smoke rollback. In Highland this shows up worst during American Fork Canyon downslope winds, when the flue simply can’t overcome the pressure pushing down on it.
  • Water intrusion at the crown and flashing. Foothill-exposed chimneys take wind-driven snow and hard freeze-thaw cycles, and water tracking down the crown degrades the liner’s top edge. Once that edge breaks down, the whole liner is on borrowed time.
  • Creosote packed against a sound liner. Not every smoky fireplace needs relining. Heavy glazed creosote from a cold, smoldering burn will choke draft and smell up the house on its own. Creosote removal plus a Level 2 Inspection tells us whether the liner is fine and the problem is fuel and airflow.

HeatShield Service in Highland: What Local Conditions Mean for Your Equipment

Here’s the local reality that shapes this work. Highland’s bench and foothill lots sit close to the mouth of American Fork Canyon, so tall two-story chimney stacks routinely get wind-driven downdrafts that smoke out living rooms even when the flue is clean. A flat valley-floor town like Lehi rarely demands this. A technician working Highland has to evaluate cap style, stack height, and pressure balance alongside creosote, because the two problems look identical from the couch and have completely different fixes. In a typical Highland bench home, a HeatShield-lined masonry fireplace smokes back into the living room during winter canyon downslope winds even after a sweep, because the flue is oversized for the firebox and the cap doesn’t break the downdraft. The right sequence is a Level 2 Inspection, confirmation that the poured liner is intact and correctly sized, then draft correction through a taller or different cap, with a genuine HeatShield refractory rebuild recommended only if the liner is genuinely cracked or delaminated at the specified thickness.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 629-7505

HeatShield Models & Products We Service in Highland

We service the full range of HeatShield liner applications found in Highland homes: cast-in-place refractory chimney liners in both insulated and non-insulated configurations, poured refractory systems for masonry fireplaces, the 1/2-inch and 5/8-inch refractory lining formulations, and liner systems installed as part of wood-burning insert retrofits. That covers the tall two-story masonry stack on a bench lot and the modest prefab fireplace in a foothill home alike.

When a repair calls for material, we use the manufacturer’s genuine refractory mix applied at the specified thickness. Aftermarket pours don’t carry the same cure and density guarantees, and they rarely hold up under Highland’s draft loads and freeze-thaw cycling. The right materials for the repair, not just what’s on the truck.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 629-7505

HeatShield Service Pricing in Highland

Pricing is set per job by a written estimate, and the estimate is free. What drives the number: the number of flues, the height and accessibility of the stack, how much creosote has to come out before we can inspect the liner, and whether the outcome is cleaning, draft correction, or a refractory rebuild.

  • Standard chimney sweeping with creosote removal: quoted per flue after we see the setup
  • Level 2 Inspection with camera and photo documentation: quoted per chimney
  • HeatShield refractory relining: quoted per flue based on diameter, height, and lining formulation
  • Chimney cap, crown, and stack-height draft correction: quoted per job
  • Chimney Rebuilding where structural masonry is involved: quoted after inspection

Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when work can safely wait. Call (855) 629-7505 for an exact quote. Estimates are free.

Serving Highland, UT – Our Local Coverage Area

We serve Highland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – HeatShield Chimney Cleaning in Highland

Service Areas Near Highland

We provide HeatShield service in Highland and the surrounding north Utah County and south Salt Lake County communities, including American Fork, Cedar Hills, Draper, Riverton, and Herriman. If you’re on the bench or in the foothills, we know the draft challenges your stack faces.

Book Your HeatShield Service in Highland Today

Get a free estimate on HeatShield service for your Highland home. Call (855) 629-7505. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, show you what we found, and give you a written estimate before any work begins.

Written by the team at Blackwell Chimney Sweep.

Need Chimney Cleaning help in Highland? Licensed & insured · free written estimates
Call (855) 629-7505
Local Service Coverage

Request a Free Estimate in Highland

Tell us what you need - Blackwell Chimney Sweep responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7