Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Draper
Chimney problems in Draper tend to show up in the houses that need their chimneys most: the larger east-bench properties with two, three, sometimes four flues running up a single stack. That’s the kind of repair work we do. We serve Draper homeowners with chimney sweeping, inspection, and repair under one roof, so a cleaning that turns up a cracked tile liner or a rusted firebox doesn’t turn into a hunt for a second contractor. Our technicians have up to 14 years of experience, and they work with the materials the trade actually specifies. Call (855) 629-7505 and we’ll get a written estimate in front of you. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Draper Homeowners Call Blackwell Chimney Sweep for Chimney Repair
Chimney work is all we do. We’re not a general handyman outfit that adds a sweep to the menu. That single-trade focus matters more in Draper than in most places, because the chimneys here aren’t simple. The east-bench homes built in the 1980s and 1990s were designed around serious fireplaces, and many of them have since had a gas insert or a wood stove added alongside the original masonry firebox. Untangling which flue serves which appliance, and what condition each one is in, is the job before the job.
We can work with your insurer when a repair ties back to a chimney fire or a freeze event, and we’ll tell you what we found and what it means in plain language. If a repair can wait a season without risk, we say so. Nothing gets recommended without camera evidence you can look at yourself. That’s the commitment, and it’s the reason Draper homeowners who’ve been quoted major liner work elsewhere call us for a second opinion.
We also know the local housing stock. Between the older brick runs and the newer luxury builds further out, the failure modes differ. East-bench masonry goes one way, newer prefab systems go another. We price the job on what your chimney actually is, not on a flat rate pulled off a chart.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Draper
Chimney Masonry Repair in Draper comes down to the freeze-thaw cycle and the age of the brick. Most of the cracked mortar joints, spalling faces, and failed crowns we see are on chimneys built in the 1970s through the 1990s, where water has been soaking in and freezing for years. A typical repointing or crown rebuild in Draper runs $450 – $1,400 depending on how much of the stack is affected and whether the crown needs to come off entirely. Larger rebuilds on a badly spalled chimney can run $2,500 – $6,000. The written estimate sets the final price.
Repointing and Tuckpointing
Repointing is the job of grinding out failed mortar and packing it back in before the brick itself starts to go. Tuckpointing on a Draper chimney usually needs doing when the joints have receded a quarter inch or more. Catching it at that stage keeps a $600 repair from turning into a rebuild.
Crown and Flashing Repair
A crack running across the crown is the most common way water gets into a Draper chimney in the first place. We rebuild or resurface the crown and reflash the roof joint where the chimney meets the shingles. Failed flashing on a steep valley roof is a slow leak that shows up months later as stained ceiling drywall.
Chimney Cap Installation in Draper
Chimney Cap Installation in Draper is one of the cheapest ways to stop damage before it starts, and it’s the repair we end up doing on a lot of the tall east-bench stacks. A properly sized stainless cap keeps rain and snow out of the flue, keeps birds and squirrels from nesting in the smoke chamber, and keeps sparks off the roof. A plain cap and install typically runs $250 – $550. A custom-fabricated cap for an oversize or multi-flue stack runs $500 – $900. We install Gelco caps because they’re built to last in this climate.
Sizing to the Appliance
A cap sized for a wood-burning fireplace will smother a gas appliance if the flue doesn’t vent properly. We size each cap to the appliance it serves, which matters on a multi-flue chimney where one cap design doesn’t fit every flue.
Multi-Flue and Custom Stacks
Tall stacks with several flues need a single cap structure sized to the whole chimney, not a collection of individual caps cobbled together. We fabricate those to fit and see that each flue still draws. Installing a chimney cap is straightforward work; getting the sizing right on a complex stack is not.
Trusted Brands We Service in Draper
We work with the brands professionals specify, not whatever’s cheap on the shelf. For liner work we install DuraFlex flexible liner systems, and when a flue has cracks too small or too widespread for a new liner to make sense, we resurface it with HeatShield. Both are specialist-tier products, which is why most general sweep companies don’t offer them. For caps and ventilation components we install Gelco and source through Olympia Chimney and Copperfield, which means access to a real parts catalog rather than an improvised fix. We don’t claim to stock parts, but the right material is a phone call away, and turnaround on a typical repair is quick.
Common Chimney Repair Problems We See in Draper Homes
- Cracked clay tile liners and rusted prefab sections. On 1980s and 1990s masonry and metal chimneys, the liner damage often goes unnoticed until smoke or draft problems appear. By then a small crack has let moisture and heat into places they shouldn’t be.
- Hidden creosote behind the damper. Tall multi-flue east-bench chimneys frequently hold creosote in the smoke chamber that a standard brush pass never touches. That’s why these need a camera inspection, not just a sweep.
- Deteriorating refractory panels and rusted fireboxes. Gas conversions and insert installs create condensation in a cold, inverted winter climate, and that moisture eats the refractory brick and firebox panels from the inside. It’s a repair-or-replace decision that hinges on how far the damage has gone.
- Spalling masonry and failed crowns. Older chimney stacks take on water through a cracked crown, then the freeze-thaw cycle pops the brick faces off. It’s the most common exterior chimney failure we see in Draper.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Draper, UT
Chimney repair pricing in Draper runs across a wide range because the range of jobs does. Repointing and tuckpointing a section of stack typically runs $450 – $1,400. A crown rebuild or flashing repair runs $350 – $900. A chimney cap and install is $250 – $550, or up to $900 for a custom multi-flue cap. Liner resurfacing with HeatShield or a new DuraFlex liner runs $1,800 – $4,500 depending on flue length and diameter. Full rebuilds on a badly damaged stack run $2,500 – $6,000. What moves the number most is how much of the chimney is affected, whether the work is accessible from the roof, and whether one flue or several are involved. The estimate is free, and the written estimate sets the final price.
We Also Serve Cities Near Draper
We serve homeowners across the south valley beyond Draper, including Bluffdale, Riverton, Alpine, and Lehi. If you’re on the Point of the Mountain side or further south into Utah County, our chimney repair team covers the same repair and inspection work we do in Draper, and the process is identical: sweep, inspect, and document before anyone recommends a repair. Call (855) 629-7505 to book.
Serving Draper, UT – Our Local Coverage Area
We serve Draper and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Draper
Yes. Each flue is its own system and needs its own annual evaluation. On a multi-flue chimney, one flue can be in good shape while the other has hidden creosote behind the damper or a cracked liner. We log each flue separately in the report so you know the condition of every appliance. Call (855) 629-7505 for an exact quote – estimates are free.
You know by camera inspection, not by guessing. Stage 3 glazed creosote and creosote hiding in the smoke chamber behind the damper are the cases where a sweep alone isn’t enough, and that’s exactly what a camera down each flue reveals. We show you the footage and explain what it means. Call (855) 629-7505 – estimates are free.
It depends on how far the deterioration has spread. Rusted firebox panels and crumbling refractory brick are common on Draper prefab fireplaces of that vintage, especially after a gas conversion or insert install, and much of it can be repaired with new refractory and a sealed crown. If the firebox itself has rusted through, replacement is the safer call, and we’ll tell you which one applies. Call (855) 629-7505 – estimates are free.
It does. During an inversion, smoke and particulate trapped near the ground have nowhere to go, and a drafty or damaged chimney makes indoor air quality worse for everyone in the house. A chimney that vents poorly in normal weather will vent worse when the inversion is holding. Repairing it before burning season is the practical move. Call (855) 629-7505 – estimates are free.
In most cases, yes. Masonry repair and cap installation on a tall multi-flue stack are commonly done together, since both need the same roof access and the same inspection first. We scope it as one visit where the work allows, and the written estimate covers both. Call (855) 629-7505 – estimates are free.
Book Chimney Repair in Draper
If your Draper home has more than one fireplace, or a tall stack you’ve never had properly inspected, that’s the place to start. We’ll sweep, inspect with a camera, document each flue, and tell you plainly what needs repair now and what can wait. Call (855) 629-7505 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Blackwell Chimney Sweep.