Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Cedar Hills
When water stains show up on a ceiling near the chimney or a cap comes loose after a canyon wind, you want a straight answer and a repair that holds. We serve Cedar Hills homeowners who burn wood through long foothill winters, and we know how the steep lots up against the Mount Timpanogos bench shape the work. Getting to a chimney here is rarely a flat-roof walk-around. We’ll tell you what we found and what it means, backed by camera evidence you can see for yourself. Call (855) 629-7505 to book a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Cedar Hills Homeowners Call Blackwell Chimney Sweep for Chimney Repair
Chimney work is all we do. That single-trade focus matters in Cedar Hills, where most homes went up from the 1990s onward with factory-built fireplaces, gas inserts, and stucco-and-stone exteriors instead of the old brick stacks you’ll find in valley cities below. Different chimneys, different failure points.
Our technicians have up to 14 years of experience, and they carry the product knowledge to match. We’re authorized to install and work with DuraFlex flexible liner systems and we use HeatShield ceramic resurfacing for cracks and deterioration that sweeping won’t fix. You get inspection, cleaning, and repair from one crew, so you aren’t chasing a second contractor to finish what a cleaning started.
We book Chimney Repair in Cedar Hills through our chimney repair team, and the estimate is free. You hear the price before anyone starts, and the written estimate sets the final cost.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Cedar Hills
Chimney Liner Installation in Cedar Hills usually comes up when a camera inspection shows a factory-built flue with damaged seams, a clay-tile flue with cracked joints, or an older stack that never had a proper liner to begin with. Many 1990s-era foothill homes here were built with metal flues that look fine from the roof, which is exactly why we run a camera first. An unlined or damaged flue lets creosote, heat, and gases reach places they shouldn’t, so an appliance vented into a stack it was never designed for is a real safety issue. Liners are not a DIY job. A typical liner installation in Cedar Hills runs roughly $2,400 to $5,500, depending on flue length, the appliance involved, and whether the chase needs opening. The written estimate sets the final price.
Metal Flue and Insert Liners
Factory-built fireplaces and wood-burning inserts need a liner that matches their venting. We work with DuraFlex flexible liner systems because that’s what professionals specify for these installs, and we size the liner to the appliance rather than forcing a universal fit.
Relining a Deteriorated Flue
When the original clay tile has cracked and spalled, HeatShield resurfacing can rebuild the flue from the inside without tearing into the chimney structure. It’s a specialist-tier repair, and we only recommend it when the camera footage supports it.
Chimney Flashing Repair in Cedar Hills
Chimney Flashing Repair in Cedar Hills is often the real answer to what looks like a flue problem. On the stucco-and-stone exteriors common up the foothill bench, step flashing can pull away from the chase wall over a few winters of freeze-thaw, and the slow leak that follows mimics a failing liner. A typical flashing repair runs about $350 to $900, more when the roofline is steep and access takes cable anchoring. The job means new step flashing, a properly sealed crown, and a camera check of the flue to rule out hidden water damage before anyone proposes a larger repair. When a leak can safely wait until warmer weather, we’ll say so.
Reading the Water Stains
Staining after spring snowmelt usually points at the crown or the chase cover before it points at the flue. A short list of what to look for starts at the crown: cracks, spalling, and a cover that no longer sits flat are the first things we check.
Stucco Chases and Steep Pitches
Flashing has to marry into a stucco wall correctly or it leaks again. On multi-level roofs, that means working on a steep pitch with proper fall protection, not a quick reach from a ladder.
Trusted Brands We Service in Cedar Hills
We work with an intentional roster of professional-grade brands because the right materials for the repair beat whatever happens to be on hand. That includes DuraFlex flexible liners, HeatShield ceramic resurfacing, Gelco and Famco caps and ventilation components, and parts sourced through Olympia Chimney and Copperfield supply lines. We don’t claim a warehouse of parts in Cedar Hills. What we do is source the correct component for your chimney rather than improvising a fix, and the brands we name are the ones the trade actually trusts. That keeps turnarounds steady and the finished repair sound for the long cold season.
Common Chimney Repair Problems We See in Cedar Hills Homes
- Caps and chase covers torn loose by canyon winds. Strong winds off Mount Timpanogos work on a cap until it lifts, letting rain and snow straight into a metal flue. Fastening it back properly matters more than a visual patch.
- Step flashing pulling away from stucco walls. On steep, multi-level rooflines the seal at the chase wall opens up and water tracks inside slowly. It often reads as a flue problem until a camera inspection rules that out.
- Cracked and spalling chimney crowns. Many crowns here were poured a little thin for the freeze-thaw swings at foothill elevation, so they crack earlier than the rest of the chimney. Once water gets in, the damage spreads.
- Creosote-heavy flues and insert venting. Cold, snowy winters mean concentrated fireplace use from November through March, and that builds creosote fast. Annual sweeping keeps it from reaching a level that calls for repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Cedar Hills, UT
Chimney repair is priced per job, and we put the number in writing before any work begins. To give you a sense of the market here: mortar repointing and tuckpointing commonly run $500 to $1,500, spalling brick repair sits around $600 to $1,800, chimney waterproofing typically falls between $300 and $700, and a full chimney rebuild starts higher, often $5,000 and up depending on the height and access. Flashing repair runs roughly $350 to $900 and liner installation about $2,400 to $5,500. Steep foothill rooflines and cable-anchored access are the main things that move a price upward.
Every one of those figures is a typical estimate, not a quote. The written estimate after inspection sets the final cost, and the inspection itself is free. Call (855) 629-7505 to get it scheduled. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Cedar Hills
Our Cedar Hills work often runs alongside jobs in American Fork, Highland, Lehi, and Alpine. Each has its own mix of roof pitches and exterior materials, and we tailor the approach to the home in front of us. Whether you’re just over the line from Highland or out toward Alpine, the process is the same: inspect, show you the camera evidence, and price the repair honestly before we start.
Serving Cedar Hills, UT – Our Local Coverage Area
We serve Cedar Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Cedar Hills
Not always, but many do. The sloped foothill lots and multi-level pitches here often rule out a simple ladder reach, so a technician may anchor to the roof for safe access to the crown and flashing. We plan access before arrival so the visit is efficient. Call (855) 629-7505 for a free estimate.
Yes. A factory-built metal flue can look flawless from the roof while seams and joints inside have let go, and only a camera shows it. We don’t recommend a liner or any larger repair without that footage in front of you. Call (855) 629-7505 for a free estimate.
Look for water staining after spring snowmelt, rust streaks on the chase, or a gap where the flashing meets the stucco wall. Those point to a pulled flashing seal rather than the flue. When it’s caught early, the fix is usually a straightforward flashing repair. Call (855) 629-7505 for a free estimate.
You generally can’t from the firebox, and that’s the point. Light, flaky creosote is routine; glazed or puffy buildup deeper in the flue or a cracked seam is a repair-level sign, and only a camera inspection separates the two. We’ll show you what we see. Call (855) 629-7505 for a free estimate.
Foothill elevation means sharper freeze-thaw swings, and a crown that was poured a little thin cracks sooner than it should. Once it cracks, water gets in and the damage moves into the masonry below. A properly sealed crown usually stops it. Call (855) 629-7505 for a free estimate.
Book Your Cedar Hills Chimney Repair
If your cap came loose, your flashing is leaking, or you just want a straight answer about the flue inside your Cedar Hills home, give us a call. You’ll get camera evidence, an honest read on what can wait, and a written estimate before any work starts. Call (855) 629-7505. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Blackwell Chimney Sweep.